Tank Monitoring Options

For most installs, the float on the Tank Full Float Switch must be flipped over 180 degrees to configure the switch as normally open. This is desired so that when the float raises up when the tank is full, the normally open circuit closes and the system stops. It is a very simple task and the instructions & photos below will help serve as a guide. 1) Remove plastic clip from bottom of switch assembly 2) Slide float down shaft to remove 3) Flip over float 180 degrees and slide back onto shaft...

Spectra has a few different available options for automated tank operation and monitoring, described below. The Tank Full Float Switch is our most widely utilized option and is included with each Connect system. The float switch is installed at the top of the tank and will turn off the system when the tank is full and then automatically starts a freshwater flush. Depending on the install, often times the float will need to be unclipped and flipped over 180 degrees to function correctly. Tank Fu...